BaoFeng UV-82 Double PTT 8W Portable Radio Walkie Talkie Amateur Radio
HIGH OUTPUT 8 WATT UV-82HX
The UV-82 is the latest generation of the classic UV-82 Series. Some new features found in the UV-82HX are the three adjustable power levels (Low – 1 watt, Middle – 4 watt, High- 8 watt) allowing for a high power output 8 watt
THE DUAL PTT DIFFERENCE
The UV-82 Series come with a dual push-to-talk button. The dual PTT is a huge leap forward in the HT technology. It allows you to transmit on two frequencies by the use of the rocker PTT switch. By pressing up you can transmit on “Frequency A” and by pushing down you can transmit on “Frequency B”. Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones.
Attention: On the BaoFeng UV-82 you are able to synchronize the PTT button to enable single Push-to-Talk communications.
THE BAOFENG UV-82 SERIES
The UV-82 series has upped the bar on affordable ham radio technology! Compared to previous BaoFeng products (UV-5R, GT-3, and the v2+ Series) the UV-82 comes with a much louder speaker (1 watt), a much more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets. It is not simply a remake but a new radio from the ground up. It outperforms the the 2nd Gen UV-5R chipset (used in the UV-5Rs, GT-3 BF-F8+, and v2+ series).
DUAL WATCH RECEIVER
The UV-82 has one built-in receiver but can “watch” two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.
FM BROADCAST STATION
You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.
GROUP TONES SUPPORTED
The UV-82 supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-82HX supports the latest standards
The UV-82 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones
INTERNAL VOX FUNCTION
The UV-82 has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.
CUSTOMIZE YOUR OPERATION WITH CHANNELS, PROGRAMMABLE BUTTONS, AND MORE!
You can program your UV-82HX exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 3 power levels (8 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.
Function
Specification
Brand |
BaoFeng |
Model |
UV-82 (1W/4W/8W Version) |
Function introduction |
LCD has a dual display function |
|
Automatic search and display functions of CTCSS/DCS signaling |
|
The new radio |
|
Flashlight lighting function |
|
U-U, V-V, U-V function |
|
The channel name edit function |
|
Dual band intercom function |
|
Computer programming function |
|
VOX voice function |
|
Frequency, channel scanning |
|
Channel scanning table editing function (which can be freely selected channel involved in scanning) |
|
General index |
|
The frequency range |
FM |
65-108MHz (radio, can receive, cannot transmit) |
VHF |
136.000-174.00MHz (VHF, transmitting and receiving are) |
UHF |
400-520.00MHz (UHF, transmitting and receiving are) |
The number of channels |
128 |
Working voltage |
7.4V DC 2800MAH lithium battery |
Step frequency |
2.5/6.25/10/12.5/20/25KHz |
Frequency stability |
+ 2.5PPM |
The 50 ohm antenna |
|
Size |
(110mm * 58mm * 32mm) (height * width * thickness) |
Emission |
|
Output power |
Triple: 8W/ 4W/ 1W |
Current |
less than 1.4A (4W) |
Modulation sensitivity |
8-12mV |
Modulation distortion |
<10% |
|
Modulation restrictions |
|
<5KHz broadband, narrowband <2.5KHz |
|
The sub audio / digital sub audio frequency offset |
|
0.75KHz + 50Hz, 0.37KHz + 30Hz |
The stray radiation |
<7 W |
Modulation mode |
16K phi F3E/11K phi F3E |
Modulation characteristics |
6dB/ per times frequency increasing |
Receiver |
|
Reference sensitivity |
-122dBm (12dB SINAD) |
Audio Power |
1W |
Audio distortion |
<10% |
Modulation of receiving bandwidth |
5K |
Clutter suppression |
greater than or equal to 65dB |
Adjacent channel selectivity (broadband, narrowband) |
= 65dB = 60dB |
Intermodulation (broadband, narrowband) |
= 60dB = 55dB |
Blocking |
= 85dB |
Standard configuration |
a host, antenna, battery charger root block, a sleeve, a hand belt clip and lanyard a, book, package box a. |
Package included:
1 xbaofeng uv-82 real 8W walkie talkie
1 x 7.4V Li-ion Battery Pack.
1 x Antenna
1 x Earphone
1 x Belt Clip.
1 x Hand Strap.
1 x AC Adapter.
1 x Desktop Charger (100V~240V).
1 x User Manual.
What Makes it Unique?
* 3 Power Levels (1, 4, 8 watt) adjustable
* VFO/ MR (Frequency Mode) can be locked via software
* The Dual PTT Switch can be synchronized via software to simplify operation of the radio
* The blacklight on/off switch time can be set via software
* Can be program to repeater manually or via software
* It includes the High Gain V-85 Antenna to Optimize Performance
* Full Accessory Compatibility with ALL UV-82 accessories
* Multiple TONE Burst Options on a NEW user Menu. Selectable Tone Burst Options Include: 1000hz, 1450hz, 1750hz, 2100hz
Reviews
There are no reviews yet.